Indiana University Digital Library Program Steelmaker-Steeltown: U.S. Steel Photograph Collection,1905-1971
Home Browse Search Teacher's Guide Contextual Materials Documentation Help Site Map

Lesson 1

Lesson 1

High School : Lesson 1 | Lesson 2

Lesson plan developed by John Trafny.

In 1906, construction crews began work on the planned United States Steel plant to be located on the southern end of Lake Michigan. Company directors decided on a site in Northwest Indiana because of what the region offered. Railroad lines, which ran through the area, would be used to bring coal and to ship the finished steel products. Raw materials could be shipped across the lake and there was ample water for the steelmaking process. Indiana taxes were lower and the plant would be close to Chicago. Finally, a ready workforce was available from South Chicago and throughout the Midwest.

Before production could begin, the entire landscape of dunes, oak forest, and swamps would have to be developed. Engineers from Illinois Steel would have to lay out the plant and rail yard. Arthur P. Melton and the Gary Land Company would design the town. Thousands of workers, engineers to common laborers would be needed. Heavy equipment, steel beams and rail, concrete, and special machinery would have to be shipped in. Even work horses would have to be ordered.

Once all plans were agreed upon the infrastructure of the plant would be put in place. A huge railroad yard was designed by John Kirk. A ship canal for ore boats would be dug. Construction on the rest of the massive plant would follow.

Back to Top

Preparation

  • Have students read Chapters 9 and 10 from Powell A. Moore's book, The Calumet Region, Indiana's Last Frontier.
  • View the following photos and interpretive text:

    Harbor and Slip
    Dredging crews began construction on the ship canal and turning basin. It would be used by the ore boats that would haul iron ore, limestone, and other materials.

    Dock Wall Continues South
    The Grand Calumet River was moved. Shifting sands made the task difficult, but company engineers and workers completed the project.

    Dock Wall
    A dock wall, nearly a mile long, was constructed to provide a storage area for ore, limestone, and needed materials.

    Looking North, Site of #1-4 Blast Furnace
    West of the docks, sites for the blast furnaces were set aside. Pictured is the area for furnaces one through four.

    Stove Foundations #7-8
    Stoves were constructed for each furnace to provide the blasts of heat necessary to make iron.

    Docks. View on Deck of Shop "Harry Coalby" Looking North at Unloaders Working
    Specially built unloaders were put into place to empty the ore boats that brought ore from Minnesota or Upper Michigan.

    Ore Bridges
    Since conveyor belts were not practical at the time, huge bridges scooped up the materials and emptied their loads near the blast furnaces. The massive structures ran on rails along the furnace line.

    Laying Foundation for Open Hearth
    West of the furnaces, Open Hearth furnaces would be needed to make ingots. Each structure had dozens of smaller furnaces. Ingots would move west to the finishing mills.

    General Office from Bridge
    Near the Main Gate along Broadway was the main office. Still in operation today, it contains the various departments that handled daily operations of the Big Mill.

    Coke Ovens. General View of Coke Ovens from Screening Station #2
    The basic steel process ran from east to west as materials moved from one facility to the next. At the Coke Plant coal was specially heated in ovens to make coke, a basic ingredient needed for the blast furnaces.

    Coke Plant. 1st Car of Coal from Corp.'s New Mine in Kentucky, Top of Car
    The Elgin, Joliet and Eastern Railroads moved material throughout the mill. Coke to the blast furnaces, molten iron to the Open Hearths, ingots to the finishing mills were moved by rail.

    Reproduction, 1st Ore Boat Coming into Gary Harbor
    U.S. Steel ore boats brought in ore and limestone throughout the year. Pictured is the Elbert H. Gary, the first ship that entered the plant when production began in 1908.

    Blast Furnace. View from Middle Platform Over West Track of #1 Ore Bridge Looking N.W. Toward Back Side of Blast Furnace
    Once the mill was in operation, the skyline along Gary's lakefront was not one of office towers and parks. Instead it was a tribute to the huge, powerful, blast furnaces.

    Gas Mains Furnace and Stoves 11 and 12 To Blowing Engine House
    Blast furnace gas provided the heat for the blast furnace stoves. Pictured is the main line which ran to the Power and Fuel Department, then to each furnace.

    View of #8 Blast Furnace Cast House
    Alongside each furnace was a cast house. Workers drilled into a special area of the furnace wall when the iron was ready. Molten iron then ran into special rail cars for shipment to the Open Hearths. It was a dangerous procedure carried out every shift.

    Photograph, Molten Slag Pouring, USS Gary Works
    Molten slag was not used, but dumped north of the blast furnaces.

    #2 O.H. Showing Brick Work in Interior of Furnaces
    In the Open Hearths the steel process continued. Like the blast furnace area, workers took part in a dangerous job that called for a high state of alert.

    #2 O.H. Metal Being Poured into Converter
    At the #2 Open Hearth molten iron is poured to make the ingots.

    Rail Mill Office Looking N.W.
    Steel rails were produced at U.S. Steel's Gary Works, The operation came to an end in the 1980's.

    20" Merchant Mill Showing Work in shipping End and Warehouse
    At the Merchant Mill, finished products were shipped to steel-related firms in the Midwest.

    Crew of Merchant Mill
    A typical crew at the Merchant Mill. Safety gear was not yet provided to workers.

    #3 O.H. Temporary Shower Baths, Summer of 1917
    Most early steel companies did not provide any wash-house facilities. Pictured are temporary showers before 1914.

    Hospital Building
    To care for injured workers, the Gary steel plant had its own hospital. The building, east of Broadway, serves as an office today.

    Paycheck-Ignatz Syaierski
    Hourly wages were low for the time put in six days a week. Shifts were twelve hours. Pictured is the check of Ignatz Syaierski.

    Boarding House, Delaware Avenue and Sixth Avenue, Plaster Put On
    To deal with the increasing number of workers, boarding houses were put up near the plant. It was a warm bed for a single man for less than a dollar a week.

    City of Gary and House 163, 5-7-Ellsworth street, Style 46, Gary Land Co., #25
    As workers sent for their wives and children homes became available through the Gary Land Company. Pictured is a house on Ellsworth Street.

    House, 564-6 Rhode Island Street, 50 Tenement House, G.L. Co. 369
    Homes were available on Gary's Eastside as well. This one was on Rhode Island Street.

    5th Avenue East of Monroe Street
    Business took hold throughout the city. Pictured is West Fifth Avenue.

    Intersection of 5th and Broadway
    Fifth and Broadway was the early Steel City's main intersection as businesses moved in.

    Municipal Building Town Site
    Gary's first City Hall was constructed at Seventh Avenue and Massachusetts Street. It also housed the police and fire departments.

    Proposed Y.M.C.A. Building
    The YMCA built its facility downtown to see to the needs of the young men.

    View of Jefferson Park, Looking North and East
    The steel company set aside land for city parks to give families a place to relax.

    Gary Country Club-Golf Club Houses and Courses
    For company and business executives the Gary Country Club was developed.

    Gary Works Baseball Team
    Workers were invited to try out for the various company sponsored sports teams.

    Photographs, Continuous Casting
    To meet the demands of its customers, U.S. Steel continued to expand and improve the quality of its products. Pictured is the Continuous Caster in 1967.

    Panorama Left to Right, Plates #1-4
    What once was an area of dunes and swamps, U.S. Steel became the largest producer of steel in North America. The lakefront changed from sand to steel.

Lesson Plan

Have students break into small groups of two to three then answer the questions assigned.

  • Why did U.S. Steel choose the site along Lake Michigan for its new plant?
  • What was needed to build the new steel plant?
  • What was involved in the steelmaking process?
  • What type of housig emerged in the town?
  • What were some of the dangers faced by workers?
  • What did U.S. Steel provide workers for relaxation?

Back to Top


This collection presented by:
The IU Digital Library Program and The Calumet Regional Archives
Last updated: 10 April 2003
URL: http://www.dlib.indiana.edu/collections/steel/tg/high-1.html
Comments: diglib@indiana.edu
Copyright 2002, The Trustees of Indiana University